Solar Inverter Installation Instructions-KTECH

2024-02-06

This article describes the installation and precautions of the inverter:

Ø Please check whether the inverter is damaged during transportation before installation ;

Ø When choosing the installation the inverter, it should be ensured that there is no interference from other electronic equipment around, and choose an installation site that is strong enough to support the weight of the inverter for a long time and make sure that it will not shake;

Ø Do not install the inverter in direct sunlight. Otherwise it may lead to additional internal inverter temperature, the inverter will be derated to protect the internal components, or even the temperature will be too high to trigger an inverter temperature failure;

Ø Before making electrical connections, be sure to cover the PV panels with opaque material or disconnect the DC side circuit breaker, which can generate dangerous voltages if the PV array is exposed to sunlight;

Ø Cables used in solar systems must be securely connected, well insulated and of the right gauge;

Ø Avoid reverse connections when connecting batteries and PV to the solar inverter;

Ø If the generator is used as the input power source, the operation is as follows: start the generator, wait for the generator to run stably, connect and turn on the solar inverter, and connect the user's equipment to the AC output when the solar inverter starts to work;

Ø Generator capacity ≥ 3 times the rated capacity of the solar inverter;

Ø Sufficient clearance should be left in front of the inverter to allow for easy observation of data as well as maintenance;

Ø All solar inverter installation operations must be completed by a professional technician.

Ketch not only manufactures and sells solar inverters and solar systems, but also provides good after-sales service. If needed, we can provide on-site technical service for you to install your solar system.